
Transform your splashback
With a simple, three-step system, Dulux Renovation Range Tiles & Benchtops is the smart way to transform your splashback and give your kitchen, bathroom or laundry a new look, without the need for a major renovation. Dulux colour featured: Cardrona
Give your splashback a fresh new look
Is your splashback in need of a refresh? Suitable for a range of purposes, Dulux Renovation Range Tiles & Benchtops can be used to paint splashbacks and leaves a professional, stain-resistant finish.
Highly durable and chip-resistant, Dulux Renovation Range Tiles & Benchtops can be tinted to thousands of Dulux colours and is available in both satin and gloss finishes.

How to get the perfect look
Prepare
Clean surfaces to avoid problems
You must remove all grease and dirt. Otherwise, the paint will peel or flake off.

Clean the area
Scrub the area with Selleys® Sugar Soap, and then rinse with clean water at least twice.
Use a plastic scouring pad on extremely dirty surfaces, and avoid using abrasive cleaning detergents.

Fix any damage
Remove any loose and flaking paint and fill cracks or holes with a suitable hard epoxy-based filler, such as Selleys® Knead-IT® Aqua.

Sand the surface
Sand glossy and semi-gloss finishes to a dull, flat finish using p400 paper.
Use a clean, damp cloth to remove dust.

Prevent mould
Thoroughly clean the surface using Selleys® Rapid Mould Killer™.

Remove silicone
Remove all silicone sealant using Selleys® Silicone Remover.

Dry and mask
Allow grout lines to dry for at least 2 hours before masking the area using good-quality painter's tape.
Once masked, you are ready to start mixing and applying.
Mix
Get the best results
For the best results, make sure to thoroughly mix the additive into the paint before beginning the application process.
Once mixed, the primer is suitable for use for up to 3 days and the topcoat for 10 days.

Add the additive
Under the blue lid of the primer paint can, you will find an additive packet.
Pour the contents of the packet into the paint.

Mix in the additive
Stir the paint with a broad, flat paddle using an up-and-down scooping action until the additive is thoroughly mixed into the paint.
Mixing will take 2 to 5 minutes.

Repeat for the topcoat
After you have finished applying your primer, repeat the mixing process with your Renovation Range topcoat.
Apply
Carefully read the instructions
For full instructions, refer to the back of the paint cans.

Cut in
Starting with Dulux Renovation Range Primer, cut in using a 38 to 50 mm high-quality angled sash cutter brush.

Apply
Coat the surface using a 4 mm nap, 100 mm wide microfibre roller.

Lay off
Once each section is coated, gently go over the surface in the same direction with an unloaded roller using minimal pressure. This will give a smooth consistent finish.

Dry
Wait a minimum of 4 hours before applying Dulux Renovation Range Tiles & Benchtops, using the same method in steps 1 to 3.
We recommend at least 2 coats, with an 8-hour dry time in between each.

Finish
Once the topcoat is dry, apply 2 coats of Dulux Renovation Range Clear Coat as the final coating.
Allow 8 hours of dry time between coats. This will add a layer of protection to the topcoat.
Here's what you'll need to get started:
Colour & Paint
Select your preferred finish
Dulux Renovation Range Tiles & Benchtops and Clear Coats are available in both satin and gloss finishes.
Tools & Accessories
Plastic scouring pad
P400 sandpaper
Flat paddle stirrer
FAQs splashbacks
This is not advisable as the Renovation Range Floors product contains a slip additive that roughens the surface. This would make the surface very difficult to clean if used on benchtops and splashbacks.
Splashbacks that include ceramic tiles, glass and laminate .
Caring for your resurfaced benchtops and surfaces is easy. To clean the surface, use a damp cloth or sponge and a mild soap or detergent. The easiest way to avoid stains is to not let spills sit on the surface. All benchtop surfaces should be wiped clean regularly. For dark scuff marks or crayon, try Selleys® Barbeque wipes and a thorough rinse with water. Trivets and potholders will protect against heat damage and using cutting boards for food prep will eliminate any chance of scratching.
It is preferable to use mild detergents to clean the painted surfaces. For harder to remover stains and scum use Selleys® Sugar Soap. For oily stains use Selleys® Barbeque wipes followed immediately with a thorough clean water rinse.
Do not use scouring pad type cleaners or cleaners that contain abrasives. Do not use bleach as this can impact on the colour of some of the colourants used in Renovation Range products.
Dulux has prepared a number of “How To” videos and placed them on www.dulux.co.nz/renovationrange
Explore Renovation Range projects
Our revolutionary, water-based interior range is perfect for painting surfaces in the kitchen, bathroom and laundry. With the Dulux Renovation Range, transforming your spaces has never been easier.
The Dulux Renovation Range range is available in hardware stores and specialty paint stores New Zealand wide. Use the store locator to find your a Renovation Range stockist near you.
Our friendly Customer Service team can help you with exactly what you need. Call 0800 800 424 and speak to one of our team members or submit an enquiry via our online form.
Available 7 days a week, start a chat with our team to discuss everything you need to gain colour confidence.
Fill out our enquiry form and our expert Customer Service team will get back to you about your request.
Disclaimer
Colours displayed should be used as a guide for your colour selection. To ensure best accuracy, test your colour choice at home by ordering Dulux Sample Pots and A4 Colour Swatches.