Get the pool house look

Cut in around the edges of the wall with a brush — these are the areas the roller cannot easily reach. Maintain a wet-edge by cutting in larger areas in sections as you go. This will help to avoid ‘picture framing’ where unblended cut in areas remain obvious after rolling.

Load the roller in the tray with a reasonable amount of paint.

Start rolling the wall in an ‘M’ pattern. Continue over the same section until the wall is evenly covered. Roll up to area of 1m² size or paint wall in sections.

Using an unloaded roller begin in the top left corner of your wall and gently let the roller roll down to the baseboards in a straight line with no pressure. A lightness of touch will prevent new roller marks from forming. Repeat this action, only this time slightly overlap your last movement so your roller rubs away the line created by the previous stroke. Continue this across the area you have painted. This is called laying off.

Once the first coat is dry, repeat the total process again with a second coat.