UltraAir® Interior Walls Matt
About UltraAir® Interior Matt
Dulux UltraAir® Interior Walls Matt is an ultra-low chemical emissions*, ultra-low odour premium water-based paint.
Proven to emit fewer chemical emissions*, Dulux UltraAir® maintains your indoor air quality. It is a whole-of-home product that is recommended for use in conjunction with Dulux UltraAir® Interior Primer and Dulux UltraAir® Ceiling White to achieve an ultra-low chemical emissions system. Dulux UltraAir® is GREENGUARD Gold certified and Global GreenTag™ GreenRate™ Level A and PlatinumHEALTH™ certified. Dulux UltraAir® can contribute to the achievement of Green Star and WELL project certifications.
So take a deep breath, relax and enjoy your great indoors.
Downloads
Application
*Ultra-low chemical emissions: Tested to pass SRIBS emission limits of <1mg/m3 within 3 days.
At a glance
- Helps maintain indoor air quality
- Lasting finish
- Available in Vivid White™ base only
- Premium quality Dulux paint that lasts
- Eco Choice Aotearoa approved (License No: 705019)
Areas to use
Performance guide
Dulux UltraAir® Interior Walls is suitable for all interior walls. It is a whole-of-home product that is recommended for use in conjunction with Dulux UltraAir® Interior Primer and Dulux UltraAir® Ceiling White products to achieve an ultra-low chemical emissions* system.
*Ultra-low chemical emissions: Tested to pass SRIBS emission limits of <1mg/m3 within 3 days.
Surfaces
• Brick
• Cement sheet
• Bare timber
• Previously painted timber/mdf/weatherboard
• Steel (galvanised)
• Concrete
• Masonry
• Plasterboard
• Set plaster
• Waterproof plaster board
• Brick and block
• Previously painted plasterboard
• Precast/tilt up and off form concrete
Previously Painted Surfaces
• Surface must be clean, dry and free from dust, oils and grease.
• Fill cracks or holes with a flexible filler.
• Spot prime repairs with Dulux UltraAir® Primer.
Glossy surfaces:
• Lightly sand to a dull finish.
Unpainted Surfaces
Unpainted plasterboard, brick, cement sheet:
One coat of Dulux UltraAir® Primer.
Bare timber:
One coat of Dulux UltraAir® Primer.
For tannin rich timber:
Use Dulux 1Step® Oil based Primer, Sealer & Undercoat^.
For set plaster, fibrous plaster, plasterglass:
One coat of Dulux PRECISION® Sealer Binder^.
^Note – Chemical emissions will not be ultra low if this product is used under Dulux UltraAir®.
Brush, roller
1. Surface must be clean, dry and free from dust, oils and grease.
2. Stir paint thoroughly with a flat paddle using an up-and-down scooping action.
3. Cut-in around the edges with a brush, then roll up to the border whilst it is still wet.
4. Apply two coats ensuring that the first coat is completely dry before applying the second.
Note: Some colours may require more than two coats, especially when painting over dark colours.
Unused paint
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
Empty paint containers
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
Shop with us when you want, how you want.
Trade Direct
Get the Dulux Trade Direct App on Android or iOS today.
Choose from our wide selection of licensed and insured painters New Zealand-wide to find the right one for your job.
Our friendly Customer Service team can help you with exactly what you need. Call 0800 800 424 and speak to one of our team members or submit an enquiry via our online form.
Book now to have an online or in-home colour consultation with a qualified interior designer.