Dulux Renovation Range Primer is a revolutionary, water-based primer that is the perfect preparation product for ceramic and porcelain tiles, vinyl, laminate and plastic wrapped cabinet doors, drawers and benchtops.
• Plastic-wrapped and vacuum-formed surfaces
• PVC
• Ceramic and porcelain tiles,
• Vinyl
• Laminate
Dulux Renovation Range Primer requires a clean surface to adhere to. All grease and dirt contamination MUST be removed, or the paint will not adhere and will peel or flake off.
1. Wash brushes and rollers prior to use.
2. Remove any loose fibres and hairs.
3. Cut in as necessary using a 38-50mm high quality angled sash cutter brush.
4. Coat surface using a 4mm nap 100mm wide microfibre roller.
5. Lay off.
6. Once each section is coated, gently go over the surface in the same direction with an unloaded roller using minimal pressure.
7. This will give a smooth consistent finish.
8. Using poor quality or worn rollers can affect the final finish achieved.
9. Allow four hours between application of primer and topcoat.
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
For more information visit painttakeback.co.nz
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz