Dulux Renovation Range Clear Coat is a revolutionary, water-based interior coating designed to add a layer of protection to the Dulux Renovation Range topcoats. It is easy to apply, providing a durable, chip and stain-resistant, washable finish that you can achieve yourself.
Kitchen, bathroom and laundry surfaces. To be used as final protection layer. Not suitable for floors.
• Kitchen
• Bathroom Laundry surfaces
• The final protection layer
Dulux Renovation Range Clear Coat should only be used directly over surfaces coated with other paints from the Dulux Renovation Range (excluding floors).
1. Cut in as necessary using a 38-50mm high-quality angled sash cutter brush.
2. Coat surface using a 4mm nap 100mm-wide microfibre roller.
3. Lay off.
4. Once each section is coated, gently go over the surface in the same direction with an unloaded roller using minimal pressure.
5. This will give a smooth consistent finish.
6. Using poor quality of worn rollers can affect the final finish achieved.
7. On benchtop, splashback and cabinet door areas apply Dulux Renovation Range Clear Coat as the final coating.
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.
For more information visit painttakeback.co.nz or paintback.com.au
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz