Dulux PRECISION® All Metal Primer has excellent adhesion and is formulated with anti-corrosive pigments to inhibit rust and corrosion for the protection of metal surfaces such as galvanised iron, ZINCALUME®, wrought iron, steel, aluminium, copper, brass and stainless steel.
• Galvanised iron
• ZINCALUME®
• Aluminium
• Steel
• Wrought iron
• Copper
• Brass
• Colorbond® or Colorsteel® and stainless steel.
This product is suitable for domestic use only.
• Galvanised iron
• ZINCALUME®
• Aluminium
• Steel
• Wrought iron
• Copper
• Brass
• Colorbond® or Colorsteel® and stainless steel.
Stir well before and during use.
For best results, apply the primer immediately after the surface preparation is complete.
For use on galvanised iron, ZINCALUME®, aluminium, copper, brass and stainless steel:
Apply one coat of Dulux PRECISION® All Metal Primer by brush, roller or spray.
Ferrous metals (steel and wrought iron):
Apply two coats of Dulux PRECISION® all metal primer by brush, roller or spray.
Thinning:
Thin if necessary with up to 50ml of water per litre.
Thinning can reduce the rust inhibiting performance of Dulux PRECISION® All Metal Primer.
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz