Copper Patina Effect from the Dulux Design Effects Collection creates the green look of weathered, aged copper when used with Dulux Copper Effect.
Dulux Copper Patina Effect is an effect solution applied by sponge or cloth over Dulux Copper Effect paint to create the look of aged copper.
• Plasterboard
• Brick
• Cement sheet
• Bare timber
• Set plaster
• Fibrous plaster
• Metal surfaces
Prepare surface as per Dulux Copper Effect.
• Apply over Dulux Copper Effect.
• Best results are achieved if treatment begins as soon as the final coat of Dulux Copper Effect is touch dry (approx. two hours) and within 12 hours of application.
• Apply Dulux Copper Patina solution by brush or muslin in a random pattern.
• The aged effect will continue to develop over days and weeks.
• A second coat can be applied if required.
• Do not apply a clear sealer as this can remove or damage the effect, especially when new.
• The level of patina will vary depending on drying time and application method.
• The patina can be rubbed off when touched.
• On exterior surfaces, patination run off may stain adjacent surfaces.
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
For more information visit painttakeback.co.nz
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz