Design Copper Effect
About Design Copper Effect
Embrace the look of lustrous, metallic copper throughout your home with Copper Effect from the Dulux Design Effects Collection.
Downloads
Application
At a glance
- Water-based
- Water wash-up
- Suitable for exterior and interior projects
- Available in 500ml
- Not to be tinted
Areas to use
Performance guide
Dulux Copper Effect is an effect product applied by roller or brush to create the look of metallic copper.
It is suitable for use on interior and exterior walls, furniture, and home accessories.
Surfaces
• Plasterboard
• Brick
• Cement sheet
• Bare timber
• Set plaster
• Fibrous plaster
• Metal surfaces
Previously Painted Surfaces
• Dulux Copper Effect can be applied over previously painted surfaces that are in good condition.
• For optimum appearance a perfectly smooth surface free of defects is required.
• Differences in surface gloss or variations in surface porosity can result in uneven colour and patchy appearance.
Previously painted surfaces in good condition:
Dust, then clean with Selleys® Sugar Soap.
Previously painted surfaces with cracks or holes repaired with filler:
Spot prime repairs with Dulux Prepcoat Acrylic Sealer Undercoat.
Glossy surfaces:
Lightly sand to a dull finish.
Unpainted Surfaces
Unpainted plasterboard, brick, cement sheet, bare timber:
Apply one coat of Dulux Acrylic Sealer Undercoat.
Unpainted set plaster, fibrous plaster, plasterglass:
Apply one coat of Dulux PRECISION® Sealer Binder.
Unpainted metal surfaces:
Thoroughly degrease and apply Dulux PRECISION® All Metal Primer.
Brush, roller
• Stir thoroughly prior to use.
• Before you begin, test your chosen application method on a large piece of board.
• Mask off adjacent walls, skirting boards and cornices.
• Brush Dulux Copper Effect around the edges of the wall.
• Apply the first coat with a medium nap roller.
• Roll using light, even pressure (strong pressure can create lines on the wall).
• Take the roller as close to the edge to cover the brush marks.
• Working in small sections, apply the second coat with a roller.
• While the paint is still wet, drag the brush in a random pattern.
• Overlap brushed areas to achieve an even effect.
• Avoid touching up.
• For an aged copper effect, apply Dulux Copper Patina Effect.
• If using Dulux Copper Effect alone the surface will mark easily.
• To protect the finish apply one thin coat of Cabot's® Cabothane® Clear Water Based Gloss after 12 hours (interior only).
• In exterior situations let Copper Effect weather naturally.
Unused paint
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
For more information visit painttakeback.co.nz
Empty paint containers
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz