1Step® Oil Based Primer, Sealer & Undercoat
About 1Step® Prep Oil Based Primer Sealer Undercoat
Dulux 1Step® Oil-Based Primer, Sealer & Undercoat is a fast-drying prepcoat suitable for the complete preparation of interior and exterior surfaces.
Downloads
Application
At a glance
- Excellent adhesion
- Use under Dulux topcoat (water or oil-based)
- Interior and exterior suitable
- Superior tanning blocking
- Available in White base
Areas to use
Precautions and limitations
Do not apply if the surface temperature is below 10C or conditions indicate it will fall below 10C during the drying period.
Do not apply externally
when weather is doubtful, or late in the afternoon during winter, as frost, rain or dew on the uncured
undercoat may result in loss of film integrity and impair durability of the system.
Surfaces
Timber and masonry surfaces.
Previously Painted Surfaces
All surfaces must be thoroughly dry, clean and free of all loose dirt, surface chalk, grease, mould, mildew and wax, loose or flaking paint.
Weathered timber: Sand back to fresh timber and dust off.
Interior timber: Lightly sand and dust off.
Masonry: Can be used on most interior and exterior masonry surfaces, but other precoats such as Dulux Acrylic Sealer Undercoat may be preferred.
New interior set plaster: Use Dulux PRECISION® Sealer Binder.
Brush, roller
1. Stir well with a broad flat paddle using an up and down scooping action.
2. Apply one coat of Dulux 1Step® Oil Based Primer, Sealer & Undercoat.
For heavily stained surfaces and paper-faced plasterboard where there is a different texture between paper and joining compound, or where extra filling and smoothness are required, apply a second coat.
Airless/Conventional Spray
Suitable for application by all standard spray equipment.
If necessary thin up to 100ml per litre of Dulux Spraying
Thinner to aid atomisation.
Unused paint
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
For more information visit painttakeback.co.nz
Empty paint containers
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz